High Quality Liquid Chlorine Gas Cylinder with Valves
- Place of Origin:
- Supply Ability:
- ISO9001, SGS, TUV, GB
Model No.: 100L, 400L, 800L, 840L, 1000L
840 L liquid chlorine Gas Cylinder with valve and flanges
Design code :GB5100 Approval: LR @GB
materialL:HP345 CAPACITY: 840L stroage 1000kg liquid chlorine
EXPORTED ALL OVERE THE WORLD
1 The cylinder should be manufactured,inspected and accepted according to GB5100 welded /steel/gas cylinder
2 The longitdinal and circumferential seams must be welded automaticly by electric-arc welding ,the tensile strengthof joints must be not less than minimum value required.
3 The longitdinal and circumferential welds welds must be examined by ≥20% X-ray radiagraphy.
4 The cylinder must be subjected to heat treatment to relieve stress entirely after all welding
operation have been completed.
5 The cylinder must withstand a hydrostatic test to 45bar without leakage and deform after
heat treatment. Dry the internal surface after testing.
6 The cylinder must withstand a pneumatic test to 15bar with leakage after hydrostatic test.
7 Internal surface must be subjected to rust cleaning before assembly an external surface
must be subjected to shot blasting after assembly.The cylinder must be coated with anti-
corrosion primer and yellow finish paint.
8 Tread seal should be winded with PTFE.
9 HP295 can be used as material of body (ends and shell) .
|nominal working pressure kgf/cm2||45|
|hydrostatic test pressure kgf/cm2||15|
|operating temperature (ºC)||-40~60|
|naminal water capacity (L)||54|
|maximum permissble filling weght (kg)||65|
|corrosion allowance (mm)||1|
|yield temperature of fusible plug (ºC)||90+5|
Product Categories : Gas Cylinder
Premium Related Products